Controllers

System controllers

This system is recommended in cases where the accumulation of input / output points is not high and includes DDC (Direct Digital Control) controllers and input / output modules for system development.

Serial port for modem connection
Communication via BACnet IP and BACnet over Eternet
Has additional memory for Real-time clock and SRAM Backup
Supports a maximum of 2 input / output modules
Has Main LAN, Sub LAN and RS-232 communication ports

Main LAN (NET1): BACnet MS / TP, 9600, 19200, 38400 or 76800 bps (maximum of 99 devices per BACnet MS / TP segment)

Sub LAN (NET2): BACnet MS / TP (maximum 99 devices) or delta LINKnet (Maximum12 device on LINKnet, with no more than 2 DFM devices)

Table of models and specifications of system controllers

Functional controllers

This series of controllers are designed for different applications such as air conditioning (air conditioner, engine room, etc.) and lighting. These series of controllers are programmable and communicate with each other via the RS-485 port under the BACnet MS / TP infrastructure, and are designed for a wide range of applications that require a limited local input / output value.

Support for Modbas protocol through the appropriate hardware

Supports up to 2 input / output modules
It has Main LAN and Sub LAN communication ports

Main LAN (NET1): BACnet MS / TP, 9600, 19200, 38400 or 76800 bps (maximum of 99 devices per BACnet MS / TP segment)

Sub LAN (NET2): delta LINKnet (Maximum10 device on LINKnet, with no more than 2 DFM devices)

Table of models and specifications of functional controllers

به بالای صفحه بردن